We concern to health and safety

------------------

Kashelara.com : Ilustrasi Energi Nuklir Untuk Perumahan

mensupport penggunaan teknologi nuklir untuk kedamaian dan perdamaian dunia..

Kashelara.com: Ilustrasi energi nuklir untuk listrik

Partner anda dalam pemanfaatan nuklir untuk keperluan damai dan kesejahteraan umat manusia

Kashelara.com: Kontak Kami

Silahkan menghubungi kami, karena kami akan membantu anda semaksimal mungkin kami bisa...

Kashelara.com: Salah satu produk andalan kami

Surveymeter Digital Inspector USB

Kashelara.com: Salah satu produk andalan kami

Pen Dosimeter Analog Charger Tipe "The Charger"

kashelara.com: @facebook

Go to Facebook.com/Kashelara for further info.

Rabu, 08 Oktober 2014

Stationary Prod MS Series


▮ Specifications
Stationary Prod ModelMS600-1MS1000-1MS2000-1MS1000-3MS2000-3
MAX. Current600010000200001000020000
Magnetizing CurrentFWDC
Current ControlInfinitely VariableDual 15stepThree Independent
Line Current100amps200amps520amps200amps520amps
Open Circuit Voltage2030343034
Recomended Line Fuse90amps160amps350amps160amps350amps
Dimension(cm)100×70×100120×100×120120×150×150120×100×120120×150×150
Weight700kg800kg2000kg800kg2000kg

Mobile Prod MM Series

It is easy to carry and makes a powerful magnetic field.
And it's equipment that can apply to large forgings and castings (Valve, shaft, ship and atomic energy parts) inspection usefully.

  • AC, HWDC magnetic field
  • Infinitely variable current control
  • Digital ammeter
  • AC Decaying Demagnetization
  • Convenient AC & HWDC transfer switch
  • Applicable to Head Shot Method, Central Conductor Method, Coil Method etc.
  • Convenient mobility
  • Remote Control switch and cable (9m)

▮ Standard Configuration
  • Mobile Prod Power Unit
  • Flexible cable 4/0 15ft pair
  • Contact Prod set
  • Remote SW. cables kit
  • Operating Manual
  • Certification
  • "T" Clamp pair
     ▮ Specifications
    PICO-MAG Mobile Prod ModelMM-300MM-400MM-600
    Magnetizing CurrentAC / HWDCAC / HWDCAC / HWDC
    MAX. OutputAC2500 HWDC3000AC3500 HWDC4000AC5000 HWDC6000
    Current ControlInfinitely Variable
    Power, Line Current440VC / 100amps440VC / 150amps440VC / 270amps
    Open Circuit Output15Volts20Volts25Volts
    DemagnetizationAC / Decaying
    DimensionL80×W70×H90 cmL80×W70×H90 cmL100×W75×H90 cm
    Weight150 kg250 kg350 kg

Black Light UV-400


The World's Most Powerful UV Lamp for NDT
  • UV wave length : 320 - 400㎚
  • UV Intensity at center : 10,000㎼/㎠ 38.1㎝
  • UV source : 400W, Metal Halide
  • Filter Dimensions : 26 x 27.9 ㎝
  • Housing Dimensions : L38.1 x W30.5 x H30.5 ㎝
  • Net Weight : 17 ㎏



  • Super Powerful : 400-watt metalhalide bulb provides an unmatched steady-state intensity of 10,000㎼/㎠ at the lamp's center, measured at a 15-inch distance.
  • Provides the Widest Dispersion : Irradiates an area as large as 24 × 10" with unequalled uniformity, producing a steady=state irradiance of not less than 2,000㎼/㎠ at 15 inches.
  • Versatile : Ideal for fluorescent penetrant and magnetic particle inspection, parts degreasing inspection, and wash station inspection.
  • Safe : Unlike competitors' lamps, its unique twin-filter system eliminates hazardous UV-B radiation to protect user
  • Meets or Exceeds MIL Specs : Satisfies military and commercial requirements
  • Compact and Lightweight Design : Easy to transport and use
  • Can be Placed anywhere : Built-in mounting capability assures easy positioning, even is previously in accessible areas

Black Light UV-125



  • High-intensity ultraviolet lamp
  • Powerful, Efficient and safe
  • Integrally filtered 125W bulb
  • UV-A(365㎚), 6000㎼/㎠(38㎝)

Black Light UV-100S


  • Powerful (100W)
  • Small & Compact/790g head
  • Very lightweight
  • Wave length 365㎚
  • Intensity : 4000㎼/㎠(38㎝)

Black Light UV-100



  • Super-high ultraviolet intensity
  • Lamp head is ergonomically designed for easy handling
  • Wave length 320-400㎚ with peak at 365㎚
  • Intensity : 6000㎼/㎠(38㎝)

Prod MP Series

MP Series are very durable to use long period of time in the industrial environment.
All the accessories including cables can put on the portable hand cart.
It's convenient to use due to AC, HWDC and common outputs.

  • AC and HWDC Output
  • Infinitely variable current control
  • Compact & Portable
  • AC Demagnetizes with prod
  • Contact and Coil magnetization
  • Easily handled by one man
  • Meets Military and Industrial specification

▮ Standard Configuration
  • Prod power Unit
  • Flexible cable 4/0, 15ft(4.5m) 1 pair
  • Contact prod kit
  • Manual
  • Certification
※ Option : portable hand cart
Specifications
PICO-MAG Prod ModelMP-1000MP-1500MP-2000
Magnetizing CurrentAC / HWDCAC / HWDCAC / HWDC
MAX. Output1000amps1500amps2000amps
MAX. Duty Cycle30sec. ON / 60sec. OFF2min. ON / 2min. OFF2min. ON / 2min. OFF
Current ControlInfinitely Variable
Power, Line Current220VC / 30amps220VC / 45amps220VC / 60amps
Open Circuit OutputAC / DC : 4.5 / 6 Volts4.5 / 6 Volts6 / 8 Volts
Dimension & WeightL55×W24×H24 cm , 20kgL55×W24×H24 cm , 42kgL65×W30×H30 cm , 50kg
※ 380, 440 VAC / OPTION

PICO-UV LINE®


♦ Super-High-Intensity Ultra Violet Lamp
  • Powerful
  • Efficient
  • Safe

♦ Applications
  • NDT
  • Leak detection
  • Quality Control
  • UV Curing

Stationary Penetrant Inspection System


The Stationary equipment used in liquid penetant testing varies in size, layout, and arrangement with the requirements of specific test.
The size of the equipment is largely dependent upon the size of the test specimen.
The stationary equipment is used in both fluorescent and non-fluorescent penetrant testings for high productivity and efficient inspection.
Its application covers automobile, ship, aircraft, machinery, electronic parts, and tools, The equipment is also available by order following the user specifications.




♦ System Configuration
The system can be positioned to accommodate floor space Iimitations and work flow requirements.
Inspection system can be set up in a straight line, with left and/or right 90˚ turns, or in a "U" turn to send parts back in the direction from which the came.

  • Penetrant Station
  • Pre-Rinse Station
  • Remover Station
  • Rinse Station
  • Developer Station
  • Dry Station
  • Inspection Station
  • Preclean & Postclean


Coil Kit MC Series

Strong Magnetic Field
Solid durability
Non contact Magnetization
AC Coil

  • AC Coil magnetizing
  • Magnetizing without contacting objects
  • Can use it for complex or small shapes of casting and forging products (Auto parts or Aircraft parts)
  • Very easy to operate, even for beginners
  • Supporting dry, wet and fluorescent methods
  • Can be demagnetized

▮ Specifications
ModelMC25/30MC25/45MC35/45MC35/60
Magnetic Force3000AT
(AIR)
4500AT
(AIR)
4500AT
(AIR)
6000AT
(AIR)
DimensionsInside : 250mm
Outside : 350mm
Inside : 350mm
Outside : 450mm
Time1-5 sec. Duty Cycle 50%
PowerStandard Type 220VAC 50-60Hz
(W)Type (Order made) 110VAC 50-60Hz

SUPER-GLO PENETRANT


Permanent-Mag : PM-YOKE 50

  • Apply in place that power supply is not need.
  • Makes a powerful magnetic field (Over 23KG)
  • Molding with plastic of strong durability

Apply in place that inspection environment is difficult such as sea, submarine structures, area that Power Supply is not, electric spark danger zone.

▮ Specifications
  • Dimensions : Ø38 × L160 mm
  • Weight : 720g
  • Lifting power : More with 23Kg(50LB.)

ZYGLO® PENETRANTS


ZYGLO fluorescent materials are used with the Liquid Penetrant inspection method to locate surface flaws in non-porous parts

  • They are available in aerosol or liquid form.
  • Choose from five sensitivity levels to satisfy military, industry or company specifications
  • Water Wash and Post Emulsifiable penetrants are available, plus a full line of emulsifiers,removers and developers.

※ M1L-I-25135E APPROVAL


♦ WATER WASHABLE PENETRANTS

PRODUCTFLASH POINTDESCRIPTIONCONTAINER SIZE
Sensitivity
Level 2
ZL-60D*>200˚F
(93˚C)
Normal sensitivity penetrant. for general purpose applications.5 G/L Pail

20 G/L Drum

55 G/L Drum
Sensitivity
Level 3
ZL-67>200˚F
(93˚C)
High sensitivity penetrant. Provides an excellent combination of sensitivity/washability
Sensitivity
Level 4
ZL-56>200˚F
(93˚C)
Ultra-high sensitivity penetrant. For extremely critical applications

♦ POST EMULSIFABLE(PE/PR)PENETRANTS

PRODUCTFLASH POINTDESCRIPTIONCONTAINER SIZE
Sensitivity
Level 2
ZL-2C>200˚F
(93˚C)
General purpose, normal sensitivity penetrant.5 G/L Pail

20 G/L Drum

55 G/L Drum
Sensitivity
Level 3
ZL-27A*>200˚F
(93˚C)
Brighter and more resistant to abusive washing than ZL-2C.
Sensitivity
Level 4
ZL-37>200˚F
(93˚C)
Ultra-high sensitivity penetrant. For critical applications

♦ EMULSIFIERS AND REMOVERS

PRODUCTFLASH POINTDESCRIPTIONCONTAINER SIZE
Emulsifier
(lipophilic)
ZE-4B250˚F
(121˚C)
General purpose Iipophilic emulsifier. Meets major specifications for sulfur and chlorine content.5 G/L Pail

20 G/L Drum

55 G/L Drum
Remover
(hydrophilic)
ZR-10B>200˚F
(93˚C)
General purpose hydrophilic remover.
Solvent
Cleaners
SKC-S*54˚F
(12˚C)
Non-chlorinated. Flammable. Meets requirements for special alloys and nuclear applications.
SKC-HF*125˚F
(51˚C)
High flash point. Low odor cleaner/remover

♦ ZYGLO DEVELOPERS

PRODUCTFLASH POINTDESCRIPTIONCONTAINER SIZE
PowderZP-4B
General purpose powder developer.10Lb., 20Lb.
Water
Soluble
ZP-14A
Improved water soluble developer to meet requirements of MIL-I-25135E.20Lb., 50Lb.
Water
Suspendible
ZP-5B
Improved developer to meet MIL-I-25135E.25Lb.
Non-AqueousZP-9F*
General purpose, non-chlorinated developer. Flammable. Recommended for titanium, nickel, and special alloys.5G/L Pail

Yoke Type : MY-100


It is AC, DC all in one type equipment and makes a powerful magnetic field.
It is excellent in detecting defects of forgings, castings, processed goods etc.

  • AC exclusive use and AC/DC all in one type.
  • Small, Lightweight and easily portable(2.2kg)
  • Good-shape and durability excels with plastic molding
  • Improved near-surface defect detection ability by DC(direct current) magnetization.
  • Excellent application for various structures by big more joint magnetic poles
  • Easy maintenance

MY-100 is AC exclusive use and AC/DC all in one type and makes a powerful magnetic field.
Surface and near-surface defect detection ability is excellent.

Standard Configuration
  • Main Yoke MY-100 : 1 set
  • Power Cables 4m : 1 ea
  • Plastic Carrying Case : 1 ea
  • Certification
  • Operating Manual

▮ Specifications
ModelMY-100MY-100AMY-100WMY-100WA
Magnetizing CurrentAC, DCAC onlyAC, DCAC only
Power220VAC/ 50-60Hz110VAC/ 50-60Hz
Related Current2.4 amps4.6 amps
Distance Between
Magnetic Core Center
Center : 155mm
Universal : 0-216mm
Lifting powerMore with AC 6kg or DC 2kg
Magnetizing CurrentAC only
Cable Length4.0m
DimensionsL190 x D49 x H205 mm
Weight(standard)2.26Kg2.2Kg2.46Kg2.4Kg

Fluorescent Penetrant / PICO Fluor


■ PICO Color Check - PF2

PICO Fluor is proper to the penetrant testing of standardization industries.
PICO Fluor makes it possible to detect openings on any surface of solid.
Under high intensity black light defects, that can be missed with dye penetrant testing, are detected.
Application of includes the articles that require high quality and have large quantity such as aircraft, automobile and electronic parts, and the ones that require continuous in-process testing or in operation such as power plant off-shore plant.


ProductPackingDescription
Fluorescent
penetrants
Post Emulsifiable
Type
PICO Fluor-P4L
19L
450㎖
General purpose normal
sensitivity penetrant
(spray Type)
Water Washable
Type
PICO Fluor-W4L
19L
General purpose normal
sensitivity penetrant
DebelopersPowderNDW-DP10Lb.
25Lb.
General purpose powder
Agueous Water
Suspendible
NDW-WP25Lb.
(11 ㎏)
Water soluble Developer
Non-AgueousNDW-WL4L
19L
General purpose liquid
RemoversSolvent
Cleaner
PICO R-1-3450㎖
4L
19L
Non-chlorinated.
Flammable Meets Requirements for special alloys and Nuclear applications
EmulsifiersEmsifier
(lipophilic)
NE-4B4L
19L
General purpose lipophilic emulsifier.
Meets major specifications for surfur and chlorine content

Yoke Type : MY-2


Will content you at the surface Inspection.
Will rugged rubber, molded housing and its excellent durability.

  • AC and makes a powerful magnetic field
  • Small, Lightweight and easily portable
  • Excellent durability with special rubber molding
  • Can achieve test alone and it's the most economical test equipment
  • Suitable for structures inspection of various form with 2 gear magnetic poles.
  • Low in danger of electric shock at wet inspection with waterproof micro switch.

Model MY-2 type keeps a powerful magnetic field and is small, light highperformance instrument.
It generates little heat although it is used for many long hours.
And especially its external shape is molded with special rubber, so it is good-shape and its durability excels.


  • Main Yoke MY-2 : 1 set
  • Power Cables 4m : 1 ea
  • 2 Universal Poles : 1 pair
  • Plastic Carrying Case : 1 ea
  • Manual & Certification

▮ Specifications
ModelMY-2MY-2W
Power220VAC/ 50-60Hz110VAC/ 50-60Hz
Related Current2.6 amps3.8 amps
Distance Between
Magnetic Core Center
Center : 135mm
Universal : 25-185mm
Lifting powerMax. 7Kg
Magnetizing CurrentAC only
Cable Length4.0m
DimensionsL220 x D46 x H155 mm
Weight(standard)2.2Kg2.4Kg
Weight(2 Universal Poles)2.4Kg2.6Kg